TECHNICAL SPECIFICATIONS

ANALOG IN (MAIN) XLR (2x), 24 bit ADC
Maximum input level: 0dBu (unity), +20 dBu (max.)
Impedance: 10 kΩ
Gain Control: 0, 9, 12 ... 60 dB - PAD (20 dB)
ANALOG OUT (MAIN) XLR (2x), 24 bit DAC
Maximum input level: 0dBu (unity), +20 dBu (max.)
Impedance: 300 Ω
Level Control: Mute, -64 ~ 0 dB
ANALOG IN (SUB) XLR (1x), 24 bit ADC
Maximum input level: 0dBu (unity), +20 dBu (max.)
Impedance: 10 kΩ
ANALOG OUT (SUB) XLR (1x), 24 bit DAC
Maximum input level: 0dBu (unity), +20 dBu (max.)
Impedance: 300 Ω
Level Control: Mute, -64 ~ 0 dB
PHONES OUT 6.3 mm TRS stereo jack, unbalanced
Impedance: 20 Ω
Level Control: Mute, -64 ~ 0 dB
DIGITAL I/O Optional Board, AES/EBU (AES3)
D-SUB 25 with 4 lines (8 channels) input + 4 lines (8 channels) output
44.1 / 48.0 / 88.2 / 96.0 kHz, 24 bits
TASCAM pin format (RME compatible)
WORD CLOCK BNC (1x), Switchable to Input or Output (via software)
44.1 / 48.0 / 88.2 / 96.0 kHz
Output: 5 Vp-p
Internal termination 75 Ohm (switchable via software)
GPIO D-SUB 9
Input: optical isolated (x 4), DC 5 V / 60 mA (max.)
Output: open collector x 4, DC 5 V / 50 mA
MicroSD slot microSDHC
RESONETZ LINK RJ-45 (1 x)
Format: NTT Hikari Denwa / HGW, ResoNetz Link
Additional Remote Control port (RJ-45)
POWER SUPPLY DC 12V / 2A (2 x) with redundancy
(AC adapter can be stored inside the housing)
CONNECTION MODES 1. NTT FLET's Hikari Denwa Data Connect Service Data (control via number pad and display)
2. Resonetz Link: Ethernet LAN, IP network (WAN, FTTH)
BANDWIDTH 0.6 Mbps (RFC 3190 equivalent / 1 ch.) to 5.0 Mbps (96 K / 24 Bit 2 ch.)
Latency time 40 ms (one way)
AUDIO FORMAT 16/24 Bit
Sample Rate: 44.1 / 48.0 / 88.2 / 96.0 kHz
CODEC 1. Linear PCM (SP Mode)
2. Equivalent to RFC 3190 (LP Mode) - in this mode AES/EBU I/O supports only 48 kHz

NEED MORE INFORMATION? GET IN CONTACT WITH OUR SPECIALISTS.